interrupts() and noInterrupts() do not have any definition.

[bimalpaneru]

Without interrupts() and noInterrupts() there is compilation error Arduino LMIC library, Hard to have the RF95 module get working

[paulvha]

There are defined in V2.2.1. Also see #431

[bimalpaneru]

Thanks @paulvha appreciate it!!

[karl-mohring]

The definitions for interrupts and noInterrupts are as below (from arduino-mbed-bridge/core-extend/Common.h):

#define interrupts() (void)am_hal_interrupt_master_disable()
#define noInterrupts() (void) am_hal_interrupt_master_enable()

Does that seem backwards to you?

interrupts should globally enable interrupts and noInterrupts globally disable them.

I couldn't find the specific code to see what's going on with the registers, but the words and the actions don't seem to match.

[paulvha]

That is what they do.

They are defined in SparkFun/hardware/apollo3/2.2.1/cores/arduino/mbed-bridge/core-extend/common.h (line 54)

[karl-mohring]

I am observing the opposite effects.

interrupts() should be defined with am_hal_interrupt_master_enable() to enable interrupts.
It is currently defined with am_hal_interrupt_master_disable().

The definitions are incorrect and should be switched.

[karl-mohring]

@paulvha
Also, I couldn't follow your pathing in this repo.

I'm assuming it's the same file that I linked above, which contains the definitions, but line 54 refers to indexTone.
Are we looking at the same file?

[paulvha]

you are correct that it works the opposite :

#define interrupts() (void)am_hal_interrupt_master_disable()
#define noInterrupts() (void) am_hal_interrupt_master_enable()

As it related to the line 54.. I have made changes to that file. The original version 2.2.1, same file, but lines 40 and 41

[nigelb]

Hi @paulvha (or maybe @gigapod), if I checkout the most recent release v2.2.2:

$ git clone --recurse-submodules --branch v2.2.2 --depth 1 https://github.com/sparkfun/Arduino_Apollo3.git
Cloning into 'Arduino_Apollo3'...
remote: Enumerating objects: 280, done.
remote: Counting objects: 100% (280/280), done.
remote: Compressing objects: 100% (232/232), done.
remote: Total 280 (delta 83), reused 139 (delta 34), pack-reused 0
Receiving objects: 100% (280/280), 2.63 MiB | 2.03 MiB/s, done.
Resolving deltas: 100% (83/83), done.
Note: switching to '9f3dc4d88e9a42f262c15b756c82e6beb4897b6f'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:

  git switch -c <new-branch-name>

Or undo this operation with:

  git switch -

Turn off this advice by setting config variable advice.detachedHead to false

Submodule 'cores/arduino/mbed-bridge' (https://github.com/sparkfun/arduino-mbed-bridge) registered for path 'cores/arduino/mbed-bridge'
Submodule 'cores/mbed-os' (https://github.com/sparkfun/mbed-os-ambiq-apollo3) registered for path 'cores/mbed-os'
Submodule 'tools/keywords_gen' (https://github.com/sparkfun/Keyword_File_Generator) registered for path 'tools/keywords_gen'
Submodule 'tools/uploaders/asb' (https://github.com/sparkfun/Apollo3_Uploader_ASB) registered for path 'tools/uploaders/asb'
Submodule 'tools/uploaders/svl' (https://github.com/sparkfun/Apollo3_Uploader_SVL) registered for path 'tools/uploaders/svl'
Cloning into '/home/user/Documents/Arduino_Apollo3/cores/arduino/mbed-bridge'...
remote: Enumerating objects: 199, done.        
remote: Counting objects: 100% (199/199), done.        
remote: Compressing objects: 100% (116/116), done.        
remote: Total 199 (delta 118), reused 149 (delta 70), pack-reused 0        
Receiving objects: 100% (199/199), 34.99 KiB | 1.09 MiB/s, done.
Resolving deltas: 100% (118/118), done.
Cloning into '/home/user/Documents/Arduino_Apollo3/cores/mbed-os'...
remote: Enumerating objects: 321427, done.        
remote: Counting objects: 100% (36/36), done.        
remote: Compressing objects: 100% (36/36), done.        
remote: Total 321427 (delta 0), reused 29 (delta 0), pack-reused 321391        
Receiving objects: 100% (321427/321427), 386.86 MiB | 12.27 MiB/s, done.
Resolving deltas: 100% (223002/223002), done.
Cloning into '/home/user/Documents/Arduino_Apollo3/tools/keywords_gen'...
remote: Enumerating objects: 62, done.        
remote: Counting objects: 100% (4/4), done.        
remote: Compressing objects: 100% (4/4), done.        
remote: Total 62 (delta 0), reused 1 (delta 0), pack-reused 58        
Receiving objects: 100% (62/62), 742.58 KiB | 4.15 MiB/s, done.
Resolving deltas: 100% (26/26), done.
Cloning into '/home/user/Documents/Arduino_Apollo3/tools/uploaders/asb'...
remote: Enumerating objects: 574, done.        
remote: Counting objects: 100% (16/16), done.        
remote: Compressing objects: 100% (12/12), done.        
remote: Total 574 (delta 2), reused 12 (delta 1), pack-reused 558        
Receiving objects: 100% (574/574), 149.29 MiB | 11.91 MiB/s, done.
Resolving deltas: 100% (235/235), done.
Cloning into '/home/user/Documents/Arduino_Apollo3/tools/uploaders/svl'...
remote: Enumerating objects: 676, done.        
remote: Counting objects: 100% (201/201), done.        
remote: Compressing objects: 100% (82/82), done.        
remote: Total 676 (delta 94), reused 184 (delta 83), pack-reused 475        
Receiving objects: 100% (676/676), 204.96 MiB | 12.39 MiB/s, done.
Resolving deltas: 100% (285/285), done.
remote: Enumerating objects: 64, done.
remote: Counting objects: 100% (64/64), done.
remote: Compressing objects: 100% (35/35), done.
remote: Total 61 (delta 25), reused 60 (delta 24), pack-reused 0
Unpacking objects: 100% (61/61), 42.89 KiB | 618.00 KiB/s, done.
From https://github.com/sparkfun/arduino-mbed-bridge
 * branch            25fe1981fe509217059f093395372e1ffcbd6335 -> FETCH_HEAD
Submodule path 'cores/arduino/mbed-bridge': checked out '25fe1981fe509217059f093395372e1ffcbd6335'
remote: Enumerating objects: 1734, done.
remote: Counting objects: 100% (392/392), done.
remote: Total 1734 (delta 392), reused 392 (delta 392), pack-reused 1342
Receiving objects: 100% (1734/1734), 5.68 MiB | 10.83 MiB/s, done.
Resolving deltas: 100% (991/991), completed with 49 local objects.
From https://github.com/sparkfun/mbed-os-ambiq-apollo3
 * branch                  50912b669e4b9ba484d534484190a4a362926c2f -> FETCH_HEAD
Submodule path 'cores/mbed-os': checked out '50912b669e4b9ba484d534484190a4a362926c2f'
remote: Enumerating objects: 33, done.
remote: Counting objects: 100% (33/33), done.
remote: Compressing objects: 100% (14/14), done.
remote: Total 30 (delta 13), reused 30 (delta 13), pack-reused 0
Unpacking objects: 100% (30/30), 9.31 KiB | 3.10 MiB/s, done.
From https://github.com/sparkfun/Keyword_File_Generator
 * branch            483ce55047a2adb3210eddd3bff2a05f658a4373 -> FETCH_HEAD
Submodule path 'tools/keywords_gen': checked out '483ce55047a2adb3210eddd3bff2a05f658a4373'
Submodule path 'tools/uploaders/asb': checked out '454fc619ce9371016f7bbdbb875aed2e197ea1ce'
Submodule path 'tools/uploaders/svl': checked out '54a37d5009fd8bb4e5c9770cabd4bed984ac7c98'

Then have a look at the submodules:

$ git submodule
 25fe1981fe509217059f093395372e1ffcbd6335 cores/arduino/mbed-bridge (heads/master-5-g25fe198)
 50912b669e4b9ba484d534484190a4a362926c2f cores/mbed-os (mbed-os-5.4.0-rc1-20343-g50912b669e)
 483ce55047a2adb3210eddd3bff2a05f658a4373 tools/keywords_gen (v1.0.0-8-g483ce55)
 454fc619ce9371016f7bbdbb875aed2e197ea1ce tools/uploaders/asb (heads/master)
 54a37d5009fd8bb4e5c9770cabd4bed984ac7c98 tools/uploaders/svl (54a37d5)

We find that the cores/arduino/mbed-bridge submodule is at hash 25fe1981fe509217059f093395372e1ffcbd6335.
If we look at the network graph for the arduino-mbed-bridge repo we can find the 25fe1981fe509217059f093395372e1ffcbd6335 lives on the remove-api-submodule branch:

If we have a look at the commits we can see that commit 25fe1981fe509217059f093395372e1ffcbd6335 is the second most recent.

The commit message and code diff of the most recent commit b239f175e5fa3c5855f685be4690d93e694abf5a on the branch remove-api-submodule would indicate the @Wenn0101 believes they inverted the logic of the interrupt functions:

[paulvha]

Hi Nigel, There has been a modification done later on :#278. That was done by GIGAPOD on 23 Aug 2023, BUT that was only posted as a pre-release as mentioned in the issue. Could that be the reason? regards, Paul Greetings from Amsterdam.

…

________________________________ Van: nigelb ***@***.***> Verzonden: dinsdag 26 maart 2024 06:22 Aan: sparkfun/Arduino_Apollo3 ***@***.***> CC: paulvha ***@***.***>; Mention ***@***.***> Onderwerp: Re: [sparkfun/Arduino_Apollo3] interrupts() and noInterrupts() do not have any definition. (Issue #472) Hi @paulvha<https://github.com/paulvha>, if I checkout the most recent release v2.2.2: $ git clone --recurse-submodules --branch v2.2.2 --depth 1 https://github.com/sparkfun/Arduino_Apollo3.git Cloning into 'Arduino_Apollo3'... remote: Enumerating objects: 280, done. remote: Counting objects: 100% (280/280), done. remote: Compressing objects: 100% (232/232), done. remote: Total 280 (delta 83), reused 139 (delta 34), pack-reused 0 Receiving objects: 100% (280/280), 2.63 MiB | 2.03 MiB/s, done. Resolving deltas: 100% (83/83), done. Note: switching to '9f3dc4d88e9a42f262c15b756c82e6beb4897b6f'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false Submodule 'cores/arduino/mbed-bridge' (https://github.com/sparkfun/arduino-mbed-bridge) registered for path 'cores/arduino/mbed-bridge' Submodule 'cores/mbed-os' (https://github.com/sparkfun/mbed-os-ambiq-apollo3) registered for path 'cores/mbed-os' Submodule 'tools/keywords_gen' (https://github.com/sparkfun/Keyword_File_Generator) registered for path 'tools/keywords_gen' Submodule 'tools/uploaders/asb' (https://github.com/sparkfun/Apollo3_Uploader_ASB) registered for path 'tools/uploaders/asb' Submodule 'tools/uploaders/svl' (https://github.com/sparkfun/Apollo3_Uploader_SVL) registered for path 'tools/uploaders/svl' Cloning into '/home/user/Documents/Arduino_Apollo3/cores/arduino/mbed-bridge'... remote: Enumerating objects: 199, done. remote: Counting objects: 100% (199/199), done. remote: Compressing objects: 100% (116/116), done. remote: Total 199 (delta 118), reused 149 (delta 70), pack-reused 0 Receiving objects: 100% (199/199), 34.99 KiB | 1.09 MiB/s, done. Resolving deltas: 100% (118/118), done. Cloning into '/home/user/Documents/Arduino_Apollo3/cores/mbed-os'... remote: Enumerating objects: 321427, done. remote: Counting objects: 100% (36/36), done. remote: Compressing objects: 100% (36/36), done. remote: Total 321427 (delta 0), reused 29 (delta 0), pack-reused 321391 Receiving objects: 100% (321427/321427), 386.86 MiB | 12.27 MiB/s, done. Resolving deltas: 100% (223002/223002), done. Cloning into '/home/user/Documents/Arduino_Apollo3/tools/keywords_gen'... remote: Enumerating objects: 62, done. remote: Counting objects: 100% (4/4), done. remote: Compressing objects: 100% (4/4), done. remote: Total 62 (delta 0), reused 1 (delta 0), pack-reused 58 Receiving objects: 100% (62/62), 742.58 KiB | 4.15 MiB/s, done. Resolving deltas: 100% (26/26), done. Cloning into '/home/user/Documents/Arduino_Apollo3/tools/uploaders/asb'... remote: Enumerating objects: 574, done. remote: Counting objects: 100% (16/16), done. remote: Compressing objects: 100% (12/12), done. remote: Total 574 (delta 2), reused 12 (delta 1), pack-reused 558 Receiving objects: 100% (574/574), 149.29 MiB | 11.91 MiB/s, done. Resolving deltas: 100% (235/235), done. Cloning into '/home/user/Documents/Arduino_Apollo3/tools/uploaders/svl'... remote: Enumerating objects: 676, done. remote: Counting objects: 100% (201/201), done. remote: Compressing objects: 100% (82/82), done. remote: Total 676 (delta 94), reused 184 (delta 83), pack-reused 475 Receiving objects: 100% (676/676), 204.96 MiB | 12.39 MiB/s, done. Resolving deltas: 100% (285/285), done. remote: Enumerating objects: 64, done. remote: Counting objects: 100% (64/64), done. remote: Compressing objects: 100% (35/35), done. remote: Total 61 (delta 25), reused 60 (delta 24), pack-reused 0 Unpacking objects: 100% (61/61), 42.89 KiB | 618.00 KiB/s, done. From https://github.com/sparkfun/arduino-mbed-bridge * branch 25fe1981fe509217059f093395372e1ffcbd6335 -> FETCH_HEAD Submodule path 'cores/arduino/mbed-bridge': checked out '25fe1981fe509217059f093395372e1ffcbd6335' remote: Enumerating objects: 1734, done. remote: Counting objects: 100% (392/392), done. remote: Total 1734 (delta 392), reused 392 (delta 392), pack-reused 1342 Receiving objects: 100% (1734/1734), 5.68 MiB | 10.83 MiB/s, done. Resolving deltas: 100% (991/991), completed with 49 local objects. From https://github.com/sparkfun/mbed-os-ambiq-apollo3 * branch 50912b669e4b9ba484d534484190a4a362926c2f -> FETCH_HEAD Submodule path 'cores/mbed-os': checked out '50912b669e4b9ba484d534484190a4a362926c2f' remote: Enumerating objects: 33, done. remote: Counting objects: 100% (33/33), done. remote: Compressing objects: 100% (14/14), done. remote: Total 30 (delta 13), reused 30 (delta 13), pack-reused 0 Unpacking objects: 100% (30/30), 9.31 KiB | 3.10 MiB/s, done. From https://github.com/sparkfun/Keyword_File_Generator * branch 483ce55047a2adb3210eddd3bff2a05f658a4373 -> FETCH_HEAD Submodule path 'tools/keywords_gen': checked out '483ce55047a2adb3210eddd3bff2a05f658a4373' Submodule path 'tools/uploaders/asb': checked out '454fc619ce9371016f7bbdbb875aed2e197ea1ce' Submodule path 'tools/uploaders/svl': checked out '54a37d5009fd8bb4e5c9770cabd4bed984ac7c98' Then have a look at the submodules: $ git submodule 25fe1981fe509217059f093395372e1ffcbd6335 cores/arduino/mbed-bridge (heads/master-5-g25fe198) 50912b669e4b9ba484d534484190a4a362926c2f cores/mbed-os (mbed-os-5.4.0-rc1-20343-g50912b669e) 483ce55047a2adb3210eddd3bff2a05f658a4373 tools/keywords_gen (v1.0.0-8-g483ce55) 454fc619ce9371016f7bbdbb875aed2e197ea1ce tools/uploaders/asb (heads/master) 54a37d5009fd8bb4e5c9770cabd4bed984ac7c98 tools/uploaders/svl (54a37d5) We find that the cores/arduino/mbed-bridge submodule is at hash 25fe1981fe509217059f093395372e1ffcbd6335. If we look at the network graph for the arduino-mbed-bridge<https://github.com/sparkfun/arduino-mbed-bridge/network> repo we can find the 25fe1981fe509217059f093395372e1ffcbd6335 lives on the remove-api-submodule branch: image.png (view on web)<https://github.com/sparkfun/Arduino_Apollo3/assets/365332/8bf65c96-2914-441c-a451-da5fe5aec77b> If we have a look at the commits<https://github.com/sparkfun/arduino-mbed-bridge/commits/remove-api-submodule/> we can see that commit 25fe1981fe509217059f093395372e1ffcbd6335 is the second most recent. The commit message and code diff<sparkfun/arduino-mbed-bridge@b239f17> of the most recent commit b239f175e5fa3c5855f685be4690d93e694abf5a<sparkfun/arduino-mbed-bridge@b239f17> on the branch remove-api-submodule would indicate the @Wenn0101<https://github.com/Wenn0101> believes he inverted the logic of the interrupt functions: image.png (view on web)<https://github.com/sparkfun/Arduino_Apollo3/assets/365332/4e31c93e-2171-42b7-aed8-1a0d61e5278b> — Reply to this email directly, view it on GitHub<#472 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AD2GBPB4L4KQOY5NR74WQOTY2EAXXAVCNFSM6AAAAAAR7KDH56VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJZGQYTQMZRHE>. You are receiving this because you were mentioned.